The operation consists in removing the aspect and functional faults owed to wearing or totehnical accidents in functioning.

    We recondition both textile and steel cord belts, whose wearing do not exceed the following values:

A.   For steel cord belts:

• sides wearing must be maximum 6 mm, versus the initial thickness;
• edge wearing, 100%;
• rend cables, max.5% from belt width;
• longitudinal breakings on limited portions or maximum one on all the lenght of the belt;
• transversal breaking with maximum 4 cables deteriorated from the eddges;
• breaking in the belt with 1-5 broken cables ;
• the lenght of the belt must more then 40ml;
• the total of defected area must must not be more 50% of the total belt.

B.   For textile insertion conveyor belts:

• wearing of both sides, , max. 5mm/total;
• wearing of the first textile insertion, 20% max of the surface of the belt
• wearing of the rubber edges on the whole surface of the belt;
• limited longitudinal breakings and local faults whose reparation do not exceed 50 % from the value of a new belt

    For both kinds of belts we check the physical and mechanical characteristics on samples from the belt, belts whose characteristics maintain in proportion of 60 % are considered to be fitted for reconditioning.